• Home
  • Installation & Instructions

What’s Included in Your Kit

Your Sunziro car sun shade installation kit includes:

  • Sunziro car window shades
  • Securing tape for installation
  • 01

    Sunziro car window shades

  • 02

    Securing tape for installation

Installation Video

How to Install Sunziro Car Window Shades

Follow these Sunziro car shade installation steps for a secure and long-lasting fit.

Step 1: Clean the Window and Door Frame

Before starting your Sunziro window shade installation, wipe down the door frame thoroughly.

Use a microfibre cloth or cleaning solution to remove dust and residue. This ensures the securing tape achieves maximum adhesion during installation.

Step 2: Position Your Sunziro Shade

Hold your Sunziro car sun shade up to the window frame.

Align it carefully and test the fit. The ideal position should have:

  • Slight tension
  • A small amount of slack

For best results:

  • Choose a flat, clean surface
  • Avoid rubber trims, as adhesive will not stick effectively

This step is key to ensuring a smooth Sunziro car window shade installation.

Step 3: Apply the Securing Tape

Take the securing tape and peel back a small section of the backing.

Start applying it in the middle of the bottom of the window frame, then:

  • Gradually peel the backing as you go
  • Press firmly along the frame
  • Run your hand over the tape to secure it

Step 4: Attach the Sunziro Shade

Now attach your shade to the frame.
Start at the top corner, then work your way around:

  • Across the top
  • Down the sides
  • Towards the bottom

Ensure the shade is evenly secured for a clean, professional finish.

Step 5: Final Check

Once installed, check your Sunziro window shade setup:

  • Make sure the shade sits flush
  • Ensure even coverage across the window
  • Confirm it feels secure

Your Sunziro car window shade installation is now complete.

How to Remove Sunziro Sun Shades

Removing the securing tape is quick and safe when done properly. Follow these simple steps:

Warm the adhesive

Warm the adhesive

Use a hair dryer on a low to medium setting for 20 to 30 seconds. This helps soften the adhesive for easier removal.

Peel gently

Peel gently

Slowly peel the Velcro tape back at a low angle. Avoid pulling it straight up, as this can put unnecessary stress on the trim.

Remove any residue

Remove any residue

If any adhesive remains, wipe it away with a soft cloth using a mild adhesive remover, eucalyptus oil, or rubbing alcohol.

Clean the surface

Clean the surface

Finish by wiping the area with a damp cloth to restore the trim.

When removed slowly and with gentle heat, the securing tape will not damage your vehicle’s interior or leave marks.

Why Install Sunziro Car Sun Shades?

Sunziro shades are designed for everyday Australian conditions, helping to:

  • Block up to 95% of harmful UV rays
  • Reduce heat inside your vehicle
  • Protect children and passengers from direct sunlight
  • Maintain airflow while driving

FAQs – Sunziro Installation & Instructions

Do Sunziro shades use magnets or clips?

No. Sunziro shades use a soft Velcro-style securing tape instead of magnets or clips. This makes the installation kids-safe and gentle on interior trims.

How long does Sunziro sun shade installation take?

Most Sunziro car sun shade installations take just a few minutes per window. Once you understand the process, installation becomes even faster.

Will Sunziro sun shades damage my car?

No. When installed and removed correctly using the provided securing tape, Sunziro window shade installation is safe and designed to be gentle on your vehicle’s interior.

Follow the removal instructions for the safest way to remove the securing tape.

Can I remove Sunziro shades and tape?

Yes. Sunziro shades can be removed when needed. For best results, ensure the securing tape remains clean and properly adhered for future use.

Removing the securing tape is quick and safe when done properly.

Use a hair dryer to gently warm the adhesive, then slowly peel the tape back at a low angle. Remove any leftover residue with a soft cloth and mild cleaner, and finish by wiping the surface clean.

When done carefully with heat, the tape can be removed without damaging your vehicle’s interior.

Do I need tools for Sunziro installation?

No tools are required, however you will need a soft, cleaning cloth, like a microfibe cloth, to clean car window trims.

What happens if I install the tape in the wrong spot?

If the positioning isn’t ideal, you can adjust the tape before fully securing it to the car trim. Always test the fit first before finalising your Sunziro car shade installation.

Do Sunziro shades affect visibility?

Sunziro car window shades are designed to reduce glare while still allowing visibility from inside the vehicle, making them safe for everyday driving.

Depending on lighting, tint and viewing angle, some visual limitations may still occur. Always ensure your blind spot remains visible. It’s best to remove the shades if visibility is compromised.

Are Sunziro durable and fade-resistant?

Installed inside your vehicle, Sunziro are designed to resist stretching, fading or warping. They come with a 1-year warranty covering workmanship and fabric fading only.

Can I install Sunziro shades on any car?

Sunziro shades are designed to be vehicle-specific for a precise fit. Always ensure you are using the correct model for your car.

Can I open my windows after installing Sunziro shades?

Yes. Once your Sunziro car window shade installation is complete, you can wind down your windows while driving. The shades are designed to stay securely in place and continue providing protection and airflow.

Ready to Install Your Sunziro Shades?

With this Sunziro car window shade installation guide, you’re set up for a quick and hassle-free installation.

Enjoy a cooler, more comfortable drive with Sunziro sun shades.

Need more help with installation? You can always email us at support@carshades.com.au, or use the contact form. We aim to respond within 3 business days.